What does RACER acronym fire stand for?
In the context of fire safety, the RACER acronym fire can refer to an abbreviation that is used to help people remember the steps to take in case of a fire emergency. RACER stands for:
Rescue:
If anyone is in immediate danger, rescue them from there but remember if it is safe.
Alarm:
Activate the installed fire alarm and call the respective fire department. Make sure everyone is aware of the emergency and knows to evacuate from the emergency area immediately.
Contain:
Close any doors or windows that can help prevent the fire and smoke from spreading.
Extinguish:
Extinguish the fire with the available right type of fire extinguishers. Again do remember that do this if it is safe to do so. This is effective in small fires that are extinguishable through fire extinguishers.
Relocate:
Relocate the habitats by following the already developed and designed emergency evacuation plan through the decided routes.
So, RACER is a simple and effective way to remember the basic steps to take in case of a fire emergency. Top of Form
Related to this RACER term, another term RACE is also common among fire safety professionals.
What does r.a.c.e stand for in fire?
Fire Race Acronym
RACEÂ stands for Remove, Alarm/Alert/Confine, Extinguish/Evacuate. Keeping cool, calm, and united when a fire breaks out is a good idea. However, this is not always possible. People can panic when they see the flames and smoke rising from their faces. They are not wrong. It is dangerous to be around a fire! It can be overwhelming when your safety and security are at stake. This can make it hard to remember and adhere to fire safety procedures. In this article, we will discuss RACE in detail.
How to use fire extinguisher? PAAS
Here are the general steps to use a fire extinguisher in case of a fire emergency:
Pull the pin:
The first step is to locate the safety pin on the top of the extinguisher and pull it out. This will break the tamper seal and allow you to use the extinguisher.
Aim at the base of the fire:
Once you have the extinguisher in your hand, aim the nozzle or hose at the base of the fire. This is where the fuel comes from, so aiming at the flames themselves will not be as effective.
Squeeze the handle:
With the nozzle or hose aimed at the fire’s base, squeeze the extinguisher’s handle to release the extinguishing agent. Remember to use short bursts of the extinguisher and not empty it all at once.
Sweep from side to side:
While squeezing the handle, sweep the nozzle or hose from side to side, covering the entire fire area. Continue using short bursts until the fire is completely extinguished.
And the next Evacuate:
Even if you think you have put out the fire, it is important to evacuate the area immediately to avoid any potential reignition or exposure to smoke or toxic fumes.
Remember, fire extinguishers are designed for small fires in their early stages. If the fire is too large, or you are not confident in your ability to extinguish it, evacuate the area immediately and call the fire department.
Follow us on social media platforms too.
Hi, I am John Smit a Captain in Fire Department City of Newyork with over years of experience in the field of Firefighting and HSE. My passion for fire safety started when I was a young boy and witnessed a neighbor’s house go up in flames along with precious lives. Since then, I had dedicated my life to ensuring the safety of buildings, properties, and individuals in case of a fire and medical emergencies.